Ryno’s fixed head adjustable paving pedestals are perfect to be used in areas that are totally level.

This system has been designed to be economical while still delivering a strong, high quality system.

The system is made up of 5 components:

Support Head

The support head has been designed to allow it to turn separately on top of the Adjustable Threaded Section of the pedestal. This means that even when the slab is in place it can be adjusted with ease. This is what holds the paving slabs in place.

Spacer Tabs

They have been created with easy removal in mind and have a pre-installed snap off design. The Spacer Tabs provide consistent spacing between the slabs so that everything remains uniform.

Adjustable Threaded Section

This section allows for effortless height adjustment, down to the exact required millimetre. All you have to do is turn the threaded section by hand to get your desired height.

Height Extension Collar

The extension collar increases the height by increments of 126mm by simply threading it onto the Support Base. the number of collars needed is depending on the size of the pedestal you have chosen.

Support Base

The broad base spreads the load on the surface below and ensures stability.

The pedestals are normally loose laid onto roofing membranes which must not be penetrated or can be mechanically fixed to concrete or other substrates.

Product Specification

Material: PP Polypropylene (recyclable), UV resistant

Resistant: Moulds, algae, alkali, bitumen

Height: 22mm to 550mm

Compression: 1000kg

Base Diameter: 200mm

Head Diameter: 120mm

Spacer tab thicknesses: 2mm / 4mm (standard) / 6mm

Working Temperature: -40°C to 120°C